Roland U-8ST Getting Started Manual page 46

Getting Ready to Use the U-8
4
In the Device Name for Output Ports, click the check box beside 1:U-8
WAVE OUT 1 [MASTER] and 1:U-8 WAVE OUT 2 [EFFECTS]. Confirm
that Sync Reference for 1:U-8 WAVE OUT 1 [MASTER] is set to Yes. If
not, click 1:U-8 WAVE OUT 1 [MASTER], then press the Move up button
so that it appears at the top of the list.
fig.1-25
5
Click OK to finish the settings, then click OK to close the ASIO Multimedia
Setup dialog.
6
If the following dialog appears, press No.
fig.1-26
46