Roland U-8ST Getting Started Manual page 54

Creating Songs with the U-8 and Cubasis VST
1
From Cubasis VST U-8's Audio menu, select U-8 Mixer.
The U-8 Mixer will start up.
2
(1) Click AUX +4 in INPUT AUX and select either AUX +4, AUX -10 or
DIGITAL to match the connector to which the device is connected. (2) Click
AUX in RECORD so that it is lit, selecting AUX for recording. (3) Raise or
lower the INPUT AUX Volume fader to the appropriate level.
fig.11-01s.e
1
3
Set up the sequencer to record audio tracks, select 1:U-8 WAVE IN for the
recording device, and put the sequencer in record standby.
4
The preparation for recording is now complete. Start the recording with the
sequencer, and begin playback of the CD, MD, or the like; the sounds input
from these gear are recorded to the sequencer.
For more information, refer to the corresponding sections in the online
manuals.
• "Connecting CD, MD, DAT, or Other Audio Equipment" in "U-8 and
External Equipment" in the U-8 Technical Guide.
54
2
3
For more on selecting
AUX+4 or AUX-10 to get
the proper recording level,
refer to "Selecting the
Auxiliary and Digital
Inputs and Setting the
Levels" (p. 66).
You can also adjust the
level with the ACC2 Track
Volume fader.
The law prohibits the
unauthorized recording,
public performance,
broadcast, sale, or
distribution, etc., of a work
(CD recording, video
recording, broadcast, etc.)
whose copyright is owned
by a third party. Roland
will take no responsibility
for any infringement of
copyright that you may
commit in using the U-8.