Roland U-8ST Getting Started Manual page 26

Getting Ready to Use the U-8
Making the Settings for the Input and Output Destinations for the
Audio Data That Windows Handles
1
In Windows, click the Start Button, and from the list of Settings choose
Control Panel. Then, in Control Panel, double-click Multimedia.
The Multimedia Properties dialog box appears.
2
Click the Audio tab.
3
Under Playback, the sound card installed in your computer is normally
specified, so if you don't want to send the audio data from Windows to the
U-8, then you can leave the settings for Playback unchanged and jump to
step 4.
For Playback, at Preferred device, click
1 [MASTER] to output warning sounds from Windows, audio output from
Media Player, or the like from the U-8.
Normally, for Playback, you should select the sound card
installed in the computer. This can avoid problems such as no
output of warning sounds from Windows (p. 25). For information
about the sound card in your computer, refer to the
documentation for the computer.
4
For Recording, at Preferred device, click
select 1:U-8 WAVE IN.
fig.12-11.e.eps_50
This causes sounds recorded with Sound Recorder and the like in
Windows to be input from the U-8.
5
Click OK to finish making the settings.
26
and choose 1:U-8 WAVE OUT
, and from the displayed list,