Making The Settings To Stop Using Vsc 3.0 - Roland U-8ST Getting Started Manual

Getting Ready to Use the U-8

Making the settings to stop using VSC 3.0

If you want to use other hardware sound module than VSC, while VSC is
still installed on your computer, you need to make the following settings.
1
Exit Cubasis VST U-8.
2
Click the VSC Helper Icon (
VSC 3.0 Settings - Device.
3
Click Select Windows audio and MIDI settings from VSC.
4
Click DirectSound Off, and choose Selecting Automatically, or a device
other than 1:U-8 WAVE OUT1/2.
fig.1-21
5
Check Select Windows audio and MIDI settings not from VSC , and set
appropriate devices for the Audio output device and the MIDI output device.
fig.1-22
* This sets the devices that Windows handles and have nothing to do with Cubasis
VST U-8. You can set the same devices as Cubasis VST U-8.
6
Click OK to close the dialog.
44
) on the Windows taskbar, and select