Roland U-8ST Getting Started Manual page 41

Settings for the AUDIO device
1
Select Windows Start - Programs - Steinberg Cubasis VST - ASIO
Multimedia setup to open the ASIO Multimedia Setup window.
2
If the following message appears, click No to proceed.
fig.1-14
3
Click the Advanced Options button to open the ASIO Multimedia Setup -
Advanced Options dialog.
4
In the Device Name for Output Ports, click the check box beside Roland
VSC 3.0 and make sure only the Roland VSC 3.0 is selected. Confirm that
Sync Reference for Roland VSC 3.0 is set to Yes.
fig.1-15
5
Click OK to finish the settings, then click OK to close the ASIO Multimedia
Setup dialog.
Getting Ready to Use the U-8
41