Installing Vsc 3.0 - Roland U-8ST Getting Started Manual

Getting Ready to Use the U-8
• You can also set expression response (however, you may be unable to
change the response in certain environments).
• You can use VSC 3.0 as a sound module for a variety of software
outputting MIDI messages.
• With a computer equipped with the Intel Pentium III processor, you can
enjoy even greater performance.
• VSC 3.0 is compatible with DirectSound, thus allowing synchronization
of game sound effects and other sounds with on-screen action (available
only with applications compatible with DirectSound).
• The Help icon in the Windows Taskbar lets you make settings for VSC
3.0 easily, right from the desktop.

Installing VSC 3.0

1
Start up Windows.
* If you have already started other software, quit them beforehand.
2
Insert the included CD-ROM into the CD-ROM drive.
3
Click the Windows Start button, and then click Run....
This displays the Run dialog box.
fig.1-1
4
Type E:\VSC3.0\SETUP in the Open text box, then click OK.
Alternatively, you can click Browse, the Setup file on the CD-ROM drive,
then click on Open.
fig.1-2
36
In this explanation we are
assuming that your CD-
ROM drive is drive E:, but
the drive letter may differ
on your computer. If the
drive letter is different on
your computer, input the
appropriate letter. To check
the drive letter of your CD-
ROM drive, double-click
the My Computer icon.