Table of Contents
Advertisement
42 Operation
Resuming Build from Pause Mode
If you have pressed Pause, and are ready to resume building the
part, press Resume. Dimension resumes modeling.
Resuming Operations from Standby
Mode
After several minutes of inactivity, Dimension enters Standby mode.
During Standby, the head temperature will decrease to save
energy.
The display panel shows, Standby and Cooling Down. The
printer temperatures are also displayed; M = Model, S = Support, E
= Envelope.
Press the Resume button - The printer returns to the Idle mode as
described in
"Building a Part From Your File" on page 38
Canceling a Job
You can cancel a job at any time while the part is building.
Cancel a job:
1. Press Pause.
2. Once Dimension stops building, press Cancel Build.
The panel displays Are you Sure?
3. Press Yes. The panel displays Build Stopped followed by the
part name.
4. The panel prompts you to remove the part and replace the
modeling base
the chamber door has been opened and closed, the panel
asks: Part Removed?
5. Press Yes only after removing the part - refer to
Completed Part"
Dimension BST 1200es / SST 1200es User Guide
("Inserting a Modeling Base" on page
30). Once
"Removing a
Hide quick links:
Advertisement
Table of Contents
