As Needed Maintenance; Remove Debris Buildup; Vacuum Build Chamber; Clean Door Glass - µ-Dimension SST 1200es User Manual

As Needed Maintenance

The following maintenance items have no routine schedule but
should be tended to as needed.

Remove Debris Buildup

Remove all material buildup on the Z Platform and around the lead
screw (See "Lead Screw and Guide Rod Identification" on
page 48.). Failure to do so could cause the base to not be level or
the Z Platform to jam at its upper limit.

Vacuum Build Chamber

Vacuum the build chamber to remove all foreign particles and
purged material.

Clean Door Glass

The door glass can be cleaned with any commercial glass cleaner.

Chamber Light Bar

Replace a chamber light bar when it burns out.
There are two light bars in the modeling chamber. They are located
on the front wall of the chamber - one to the right, the other to the left
of the chamber door.
Use proper ESD grounding techniques
when handling electronic components.
Use only a factory authorized
replacement light bar.
NOTE
Dimension BST 1200es / SST 1200es User Guide
CAUTION
Maintenance 57