Sending Your Cad File To The System - µ-Dimension SST 1200es User Manual

2. If a part has been sent to the printer for build (there is at least
one part in the build queue), but is not building:
a. The panel displays Ready to Build.
b. The name of the first model in the build queue is displayed.
c. The amount of material remaining in the model material
cartridge and the support material cartridge (e.g. Mod
90%, Sup 85%) is displayed.
If a material amount is flashing, it indicates that the
remaining material will NOT be sufficient to complete
the current build.
d. Start Model is blinking. Press the Start Model button
to begin building the displayed part.

Sending Your CAD File to the System

This section describes the procedures used for sending your own
CAD files to Dimension.
Send a "job" to Dimension:
1. Create an STL file with your CAD software.
2. Click on the CatalystEX icon
CatalystEX main window opens
NOTE
Dimension BST 1200es / SST 1200es User Guide
on the desktop of your PC. The
(Figure 13 on page
Operation 39
40).