PS Parameters
Menu
Data Format
Operating Instructions
You can select the data format.
•
Binary Data
•
TBCP
Limitation
This setting is effective when operating the machine with a parallel,
USB or EtherTalk connection.
When operating the machine with a parallel or USB connection, if
binary data is sent from the printer driver, the print job is canceled.
When operating the machine with an Ethernet connection, the print
job is canceled under the following conditions;
•
The printer driver data format is TBCP and the data format se-
lected on the control panel is Binary Data.
•
The printer driver data format is binary and the data format se-
lected on the control panel is TBCP.
Note
Default: Binary Data
Administrator Reference
Description
183