Changing the Interface
You can specify either the LAN interface or IEEE 802.11b interface when using the optional
802.11b interface unit.
msh> ifconfig interface up
Note
You cannot specify the IEEE 1394 interface.
The following is an example of configuring an IP address of 192.168.15.16 on the Ethernet interface:
msh> ifconfig ether 192.168.15.16
The following is an example of configuring a subnet mask of 255.255.255.0 on the Ethernet interface:
msh> ifconfig ether netmask 255.255.255.0
Note
This affects the configuration of the network interface board with the IP address used.
The TCP/IP setting is the same as that for the LAN interface and IEEE 802.11b interface.
To enter an address using hexadecimal, prefix it with "0x".
Operating Instructions
Administrator Reference
197