Configuring Netbeui For Printing - Ricoh CL7000 Operating Instructions Manual

C C C C
Click the [Services] tab, and confirm that "Microsoft TCP/IP Printing" is installed.
If "Microsoft TCP/IP Printing" is not installed, click [Add] on the [Services] tab, and install it. For
more information about installing and configuring network services, see Windows NT Help.

Configuring NetBEUI for Printing

This describes how to configure the network interface board and Windows NT to use NetBEUI.
Preparation
To use NetBEUI, use the SmartNetMonitor for Client port.
Configuring the printer
Configure the printer to use NetBEUI.
• Check NetBEUI is set to active. (The factory default is active.)
Reference
For more information about how to make the above settings, see "Windows NT 4.0 Configuration",
Printer Client Reference.
Operating Instructions Administrator Reference
54