Installing Smartnetmonitor For Admin; Setting Up As A Print Server - Ricoh CL7000 Operating Instructions Manual

Installing SmartNetMonitor for Admin

Install SmartNetMonitor for Admin on your computer. For the installation procedure, see
ing SmartNetMonitor for
After installing SmartNetMonitor for Admin, go to
puter as a print server, or to

Setting Up as a Print Server

A A A A
Log on to the file server as a Supervisor or the equivalent of a Supervisor.
B B B B
Run SmartNetMonitor for Admin.
C C C C
On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of printers appears.
Note
If you cannot identify which printer to configure from the list of printers, print the configuration
page and find it. For more information about printing the configuration page, see
a Configuration
If no printer name appears on the list, match the IPX/SPX frame types between the computer
and printer. Use the [Network] dialog box of Windows to change the computer frame type. For
more information about changing equipment frame types, see
the Control Panel".
D D D D
Select the printer you want to configure, and then click [NIB Setup Tool] on the [Tools] menu.
E E E E
Click [Wizard], and then click [OK].
Operating Instructions
Admin".
p.79 "Setting Up as a Remote Printer"
Page".
Administrator Reference
p.77 "Setting Up as a Print Server"
to use it as a remote printer.
p.71 "Configuring NetWare Using
77
p.94 "Install-
to use this com-
p.133 "Printing