Installing SmartNetMonitor for Admin
Install SmartNetMonitor for Admin on your computer. For the installation procedure, see
ing SmartNetMonitor for
After installing SmartNetMonitor for Admin, go to
puter as a print server, or to
Setting Up as a Print Server
Important
You must set up the print server using NDS mode in NetWare 4.x, 5/5.1, 6.
A A A A
Log on to the file server as a Supervisor or the equivalent of a Supervisor.
B B B B
Run SmartNetMonitor for Admin.
C C C C
On the [Group] menu, point to [Search Device], and then click [IPX/SPX] or [TCP/IP].
A list of printers appears.
Note
If you use Pure IP, click [TCP/IP].
If you cannot identify which printer to configure from the list of printers, print the configuration
page and find it. For more information about printing the configuration page, see
a Configuration
If no printer name appears in the list, match the IPX/SPX frame types between the computer and
printer. Use the [Network] dialog box of Windows to change the computer frame type. For more
information about changing equipment frame types, see
Control
Panel".
Operating Instructions
Admin".
p.88 "Setting Up as a Remote Printer"
Page".
Administrator Reference
p.84 "Setting Up as a Print Server"
to use it as a remote printer.
p.71 "Configuring NetWare Using the
84
p.94 "Install-
to use this com-
p.133 "Printing