Ricoh CL7000 Operating Instructions Manual page 78

F F F F
Enter the device name in the [Device Name] box, a comment in the [Comment] box if necessary,
and then click [Next>].
G G G G
Select the [NetWare] check box, and then click [Next>].
H H H H
Click [Bindery Mode], enter the file server name in the [File Server Name:] box, and then click
[Next>].
In the [File Server Name:] box, enter the name of the file server in which the print server is to be
created. You can also select a file server from the list that appears by clicking [Browse].
I I I I
Enter the print server name in the [Print Server Name] box, the printer name in the [Printer
Name] box, and the print queue name in the [Print Queue Name] box, then click [Next>].
• In the [Print Server Name] box, enter the name of the NetWare print server using up to 47 char-
acters.
• In the [Printer Name] box, enter the name of the NetWare printer.
• In the [Print Queue Name] box, enter the name of the print queue to be added to NetWare.
J J J J
After confirming the settings, click [Next>].
The settings take effect, and NIB Setup Tool closes.
K K K K
Exit SmartNetMonitor for Admin.
L L L L
Turn the printer power off and on.
Note
To check the printer is configured correctly, enter the following after the command prompt:
F:> USERLIST
If the printer works as configured, the name of the print server appears as an attached user.
Operating Instructions Administrator Reference
78