Ricoh CL7000 Operating Instructions Manual page 215

Parameter
key [key value]
auth [open|shared]
rate [auto|11m|5.5m|2m|1m]
Operating Instructions
Value to be configured
With 64-bit WEP, you can use 10 digit hexadecimal.
With 128-bit WEP, you can use 26 digit hexadecimal.
To use this function, set the same WEP key for all ports
that transmit to each other.
You can set the authorized mode when using WEP. The
specified value and authorized mode are as follows:
open: Open system authorized (default)
shared: Shared key authorized
You can set the IEEE 802.11b transmitting speed.
The transmitting speed you specify here is the speed at
which data is sent. You can receive data at any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
Administrator Reference
215