Changing Port Settings - Ricoh CL7000 Operating Instructions Manual

Changing Port Settings

This describes how to change SmartNetMonitor for Client settings, such as proxy server settings or IPP
URL.
Note
There are no settings for NetBEUI.
A A A A
In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click
[Properties].
B B B B
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration:] dialog box appears.
Note
If you cannot set items on the [Recovery/Parallel Printing] tab, follow the procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartNetMonitor for Client, and then right-click the SmartNetMonitor for Client icon on
the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each port]
check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure User Settings, Proxy Settings, and Timeout Settings.
Note
For more information about these settings, see SmartNetMonitor for Client Help.
Operating Instructions Administrator Reference
66