Configuring A Wins Server - Ricoh CL7000 Operating Instructions Manual

Using AutoNet
If the printer IP address is not assigned by a DHCP server automatically, a temporary IP address starting
with 169.254 that is not used on the network can be automatically selected by the printer.
Limitation
You must change the setting to "on" to use AutoNet. See
Note
The IP address assigned by the DHCP server is given priority over that selected by AutoNet.
You can confirm the current IP address on the configuration page. For more information about the
configuration page, see
When AutoNet is running, the NetBIOS name is not registered on the WINS server.

Configuring a WINS Server

The printer can be configured to register its NetBIOS name with a WINS server when its power is
turned on. This enables the NetBIOS name of the printer to be specified from SmartNetMonitor for Ad-
min even under a DHCP environment.
This section describes how to configure the WINS server.
Note
The WINS Server is supported with Windows NT 4.0 Server Service Pack 4 or later, and Windows
2000 Servers WINS Manager.
For more information about the WINS Server settings, see Windows Help.
If there is no reply from the WINS Server, the NetBIOS name will be registered by broadcast.
The NetBIOS name consists of up to 13 alphanumeric characters.
Operating Instructions
p.133 "Printing a Configuration
Administrator Reference
p.218 "AutoNet".
Page".
252