Ricoh CL7000 Operating Instructions Manual page 241

Message
Could not attach to PServer<print server>
Current Interface Speed:xxxMbps
Current IP address <current IP address>
Current IPX address<IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
Duplicate IP=<IP address>(from <MAC address>).
Established SPX Connection with PServer,
(RPSocket=<socket number>, connID=
<connection ID>)
exiting
Exit pserver
Operating Instructions
Causes and solutions
(In remote printer mode) Cannot attach to the print server.
For some reason, the print server is refusing the connec-
tion. Check the print server configuration.
The speed of the network (10 Mbps or 100 Mbps)
The IP address <current IP address> was received from
the DHCP server.
The current IPX address
DHCP lease time has expired. The printer tries to locate
the DHCP server again. The IP address used till now be-
comes invalid.
The DHCP server cannot be found. Make sure the DHCP
server is running on the network.
A dhcpcd (DHCP client service) has started.
The same IP address is in use. Every IP address must be
unique. Check the address of the device indicated in
<MAC address>.
(In remote printer mode) A connection to the print server
has been established.
lpd service has ended and the system is closing.
(In print server mode) Exits the print server because the
necessary print server settings have not been made.
Administrator Reference
241