Ricoh CL7000 Operating Instructions Manual page 207

IPP
Use the "ipp" command to configure IPP settings.
Viewing setting
The following command displays the current IPP settings:
msh> ipp
Example output:
timeout=900(sec)
auth basic
• The "timeout" setting specifies how many seconds the computer keeps trying to access the net-
work printer to send print jobs when no connection can be made.
• The "auth" setting indicates the user authorization mode.
IPP timeout configuration
Specifies how many seconds to wait before canceling a print job if it has been interrupted for some
reason. The range of time can be changed between 30 to 65,535 seconds.
msh> ipp timeout {30 -65535}
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The factory default is "off".
msh> ipp auth {basic|digest|off}
• The settings of user authorization are "basic" and "digest".
• Use "off" to remove a user's authorization.
Note
If you select "basic" or "digest", see the next section "Configuring IPP user authorization" for more
information about how to configure the user name.
Operating Instructions Administrator Reference
207