Ricoh CL7000 Operating Instructions Manual page 86

J J J J
After confirming the settings, click [Next>].
The settings take effect, and NIB Setup Tool closes.
K K K K
Exit SmartNetMonitor for Admin.
L L L L
Turn the printer power off and on.
Note
To check the printer is configured correctly, enter the following after the command prompt:
F:> NLIST USER /A/B
If the printer works as configured, the name of the print server appears as an attached user.
Using Pure IP in the NetWare 5/5.1, 6 Environment
Note
When not using IPX, it is recommended that you change the print server protocol in the Web brows-
er from [TCP/IP+IPX] to [TCP/IP].
A A A A
Log on to the file server as an Admin or the Equivalent of an Admin.
B B B B
Run SmartNetMonitor for Admin.
C C C C
Click [Property Sheet], and then click [OK].
The [NIB Setup Tool] dialog box appears.
Operating Instructions Administrator Reference
86