Matrix SETU VGRX System Manual page 82

To apply this method, configure the following:
• In the On Detecting Voice, route call, select after collecting the digits.
Under Settings, the parameter Time Between Consecutive PTT will become uneditable and the
parameter PTT Count to Place a call will be set to 1 and will also become uneditable.
You may also configure the following related parameters:
Dial Plan
• SETU VGRX supports 8 Dial Plans with total 64 entries in each table. When a user dials a number, it is
compared with the Destination Number configured in the Dial Plan. If a match is found, the system
routes the call immediately without waiting for End of Dialing and if a match is not found, the system will
wait for the End of Dialing and then route the call as per the Destination Port Selection method
configured.
Select the Dial Plan table number you configured for this port. If you have not configured the Dial Plan
table you may do so now,
• Click Settings
• The Dial Plan Table page opens in a new window.
• You may configure the default Dial Plan Table-1 or any other Table (from 2 to 8) for the Radio Port. You
can store 64 Numbers at Index Numbers 01 to 64 respectively.
74
.
Matrix SETU VGRX System Manual