Table of Contents
Advertisement
no digit is dialed by the system on the FXO Port. This is used when the exchange takes some time to
detect that the FXO Port is Off-hook. Default: 1000 msec.
This timer will also be used while applying ANT logic, if you have configured Pause (^) in the Add Prefix
column of ANT table. See
•
Select the Allow Call Disconnection using Access code check box, if you want to enable the feature
Disconnect Call using Access Code on the FXO Port. See
•
Click Submit to save the settings.
Handling of Incoming Calls
•
Click Handling of Incoming Calls.
•
If you do not want to route calls received on this FXO Port, select the Block all calls received on this
FXO Port check box. Default: Disabled.
Destination Number Determination
Select the desired destination number determination method for routing incoming calls with and without CLI.
•
To Route all Incoming calls (with CLI), you may select from any of the following methods.
•
without any Destination Number
•
to the Fixed Destination Number
Matrix SETU VGRX System Manual
"Automatic Number Translation (ANT)"
for more details.
"Disconnecting a Call using Access
Code".
93
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGRX and is the answer not in the manual?