Table of Contents
Advertisement
The SIP Trunk-1 window opens.
•
Select the SIP Trunk check box to enable the SIP Trunk. Default: Disabled.
Calls will not be routed through this trunk, if disabled.
•
You can assign a Name to the SIP Trunk for identification. The Name can be a maximum of 24
characters. Default: Blank.
Assign the name of the ITSP with which the trunk is registered, or any other name of your choice. The
name will appear on the display of the remote party's phone, when a call is made through this SIP
Trunk.
•
In SIP ID, the SIP ID that you assign under
•
Status displays the status of the SIP Trunk.
Basic Settings
•
Click Basic Settings.
154
"Basic Settings"
is displayed.
Matrix SETU VGRX System Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGRX and is the answer not in the manual?