Matrix SETU VGRX System Manual page 144

• By default, SIP Trunk 1-1 (Ascending) is assigned as the Routing Group, for routing calls from numbers
that do not match with any of the destination numbers you configured (No Match Found).
To change the default Routing Group and to create the Fallback Routing Group for the No Match Found
numbers entry,
• under Edit, click Settings
• The Edit Entry window opens.
• Create the Routing Group and Fallback Routing Group as per your requirement.
• Click Submit and close the window.
• Close the window if you have finished adding/editing entries.
You can also configure the Destination Number Based Table from Advanced Settings. For instructions,
see "Destination Port Determination"
On the basis of Calling Party Number
In this method, incoming calls on the Mobile Port are routed to a specific port as per the calling party's number.
To apply this method, do the following:
• In Select Destination Port for routing calls, select On the basis of Calling Party Number option.
136
.
under Advanced Settings.
Matrix SETU VGRX System Manual