Table of Contents
Advertisement
The Edit Selective Port/Group for FXO Port window opens.
•
Select the CLI Number to be sent on Destination Port. You can select Received Calling Party or
Received Called Party. Default: Received Calling Party.
CLI to be sent on Destination Port is applicable when FXS Port/Group is determined as the Destination
Port.
•
Create the Routing Group.
•
To create a group of sequential FXS Ports as members,
•
Select the desired FXS Port numbers as members. Default:1.
•
In the in - order box, select the order in which the system should hunt for a free member FXS Port
to route the call.
Select Ascending to start hunting from the first to the last member FXS Port. Select Descending to
start hunting from the last to the first member FXS Port. Default: Ascending.
•
Similarly, you can create a group of sequential FXO Ports, Mobile Ports, Radio Ports and SIP Trunks.
Matrix SETU VGRX System Manual
101
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGRX and is the answer not in the manual?