Temperature Setting (Parameter Screen) - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

__ TECNOEKA Srl ____________________________________________________ operating and instruction manual _

4.3.3.2 TEMPERATURE setting (PARAMETER SCREEN)

4.3.3.2 TEMPERATURE setting (PARAMETER SCREEN)
4.3.3.2 TEMPERATURE setting (PARAMETER SCREEN) 4.3.3.2 TEMPERATURE setting (PARAMETER SCREEN)
Using the "STEP"
1. CAVITY TEMPERATURE
2. CORE TEMPERATURE
3. DELTA T value
1. 1. 1. 1. CAVITY TEMPERATURE CAVITY TEMPERATURE CAVITY TEMPERATURE CAVITY TEMPERATURE
Use keys
260°C). Next, confirm your choice with the "SELECT"
With "COOKING IN PROGRESS": the value of the set temperature appears on the display
by the symbol, while the value of the actual temperature detected in the cooking
cavity appears by the
2. 2. 2. 2. CORE TEMPERATURE CORE TEMPERATURE CORE TEMPERATURE CORE TEMPERATURE
Use keys
Next, confirm your choice with the "SELECT"
With "COOKING IN PROGRESS": the value of the set temperature appears on the display
by the symbol, while the value of the actual temperature detected by the core
temperature probe appears by the
When the CAVITY TEMPERATURE parameter
are given on the SUMMARY SCREEN, proceed as follows to go back to set the TIME
parameter
Use the "STEP" "STEP" "STEP" "STEP"
-
- Touch the "SELECT" "SELECT"
"SELECT" "SELECT"
_ page 22 _________________________________________________________________________________________
key, you can set:
(The core probe is not included but is an optional accessory)
(
The core probe is not included but is an optional accessory)
and to increase or decrease the temperature value (from 30°C to
symbol.
and to increase or decrease the temperature value (from 0°C to 100°C).
:
key to select the CORE TEMPERATURE parameter
key (the PARAMETER SCREEN comes up on the display);
"SELECT" "SELECT" "SELECT"
"SELECT" key.
"SELECT" "SELECT"
symbol.
and the CORE TEMPERATURE parameter
key.
.