TECNOEKA EKF 664 TC Original Operating And Instruction Manual page 23

_ Electronic convection oven _ rev. 0 ________________________MODD. EKF 664 TC – EKF 711 TC – EKF 1064 TC
- Use the "STEP" "STEP"
"STEP" "STEP"
- Touch the "SELECT" "SELECT" "SELECT" "SELECT"
Once you have followed these steps, the SUMMARY SCREEN will appear on the display in
red (if the PREHEAT function has not been set) to indicate that the TIME parameter
("00.00") is missing.
3. 3. 3. 3. DELTA T VALUE DELTA T VALUE
DELTA T VALUE DELTA T VALUE
Use keys
Next, confirm your choice with the "SELE
With "COOKING IN PROGRESS": the value of the set temperature appears on the display by the
symbol, while the value of the actual temperature detected by the core temperature probe
appears by the
The set temperature value appears by the
temperature detected in the cooking cavity appears by the
When the CORE TEMPERATURE parameter
the SUMMARY SCREEN, proceed as follows to go back to set the TIME parameter
- Use the "STEP"
- Touch the "SELECT"
- Use the "STEP"
- Touch the "SELECT" "SELECT"
"SELECT" "SELECT"
Once you have followed these steps, the SUMMARY SCREEN will appear on the display in red (if
the PREHEAT function has not been set) to indicate that the TIME parameter ("00.00") is
missing.
_________________________________________________________________________________________ page 23 _
key to select the CAVITY TEMPERATURE parameter
key.
and to increase or decrease the temperature value (from 0°C to 100°C).
symbol.
key to select the DELTA T parameter
key (the PARAMETER SCREEN comes up on the display);
key to select the CAVITY TEMPERATURE parameter
key.
EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
"SELECT" "SELE "SELE CT" CT" CT" key.
symbol, while the value of the actual
and the DELTA T parameter
;
symbol.
are given on
;
;
: