TECNOEKA EKF 664 TC Original Operating And Instruction Manual page 41

Table of Contents

_ Electronic convection oven _ rev. 0 ________________________MODD. EKF 664 TC – EKF 711 TC – EKF 1064 TC

ACTIVATING THE "HACCP" FUNCTION

To activate the "HACCP" function, proceed as follows:

insert the "USB drive" in the relevant "USB port" on the oven.

set the cooking cycle (manual or programmed)

touch the

keep tapping the "STEP"

touch the "SELECT"

"SELECT"

Use the "START/STOP"

"START/STOP"

Once the cooking cycle has ended, the "HACCP" function switches off automatically.

VIEWING "HACCP" DATA (ON A PC)

To view the parameters of a completed cooking cycle on a PC:

hold your finger on the "START/STOP"

oven

remove the "USB drive" from the oven and insert it in the PC's "USB port"

open the desired "file" contained on the "USB drive"

All data relating to cooking sessions performed on the same day are contained in the

same "HACCP" file.

Once another "HACCP" file has been created for a later day, the previous "HACCP" file

is renamed automatically, highlighting the date the cooking sessions took place.

_________________________________________________________________________________________ page 41 _

key to call up the "PROGRAMMING MENU" screen.

"STEP"

key until you select the "HACCP" option

"STEP"

key to confirm your choice: the "HACCP" function is activated

key to start the cooking cycle.

"START/STOP"

EKF 1111 TC – EKF 1664 TC – EKF 2011 TC

key for a few seconds and switch off the

Table of Contents

Ekf 711 tc Ekf 1064 tc Ekf 1111 tc Ekf 1664 tc Ekf 2011 tc