Manual Operation; Cooking Time Setting; Cooking Temperature Setting - TECNOEKA TOUCHSCREEN MKF D1T Original Operating And Instruction Manual

2.7 Operation of the oven (summary) screen
"Upper" temperature
(Upper cooking chamber
area)
"Lower" temperature
(Lower cooking chamber
area)
Functional condition of the
oven
Number of
humidity/steam production
cycles and duration of each
cycle
When a timed cooking cycle is active, the display shows "COOKING" in red. Two red bars are also
highlighted in the direction of the and/or symbols, which indicate the operation of the "upper" and/or
"lower" resistors. When the setpoint value of the set temperature is reached in the cooking chamber, the
display confirms the functional status by displaying the message (in green) " READY"; otherwise, the
message (in yellow) " PREHEATING" is displayed.".
If the functional status of the oven displays an alarm code, refer to the section on the various "ALARMS".

2.8 MANUAL operation

2.8.1 Cooking TIME setting

When the display is active, a cooking time (up to 99 minutes and 59 seconds) can also be set, after which a
beep sounds. However, the oven continues to operate with the set parameters (operation can be stopped
by touching the symbol for at least 3 seconds
Tap the icon (in clear text)
increases by tapping the icon (in clear text)
you keep your finger on the same icons, the value of the parameter increases or decreases quickly. To
confirm the set value tap t h e i c o n ( i n g r e e n )
seconds. To change and confirm the value, use the icons as before to change and confirm the value of the
minutes. The parameter value must be set within 15 seconds.
To stop the setting procedure and return to the initial values, tap the icon (in red)

2.8.2 Cooking TEMPERATURE setting

To set the "upper temperature" (with active display):
Tap the icon (in clear text)
350°C). The value increases by tapping the icon (in clear text)
clear text) . If you hold your finger on the same icons, the value of the parameter increases or
decreases quickly. To confirm the set value, tap t h e i c o n ( i n g r e e n )
The parameter value must be set within 15 seconds.
To stop the setting procedure and return to the initial temperature value, tap the icon (in red)
To set the "lower temperature" (with oven running):
Tap the icon (in clear text)
350°C) . The value increases by tapping the icon (in clear text)
9
Time
automatic
: the display shows the digits (in yellow) of the minutes. The value
: the display shows the digits (in yellow) of the temperature (from 30°C to
: the display shows the digits (in yellow) of the temperature (from 30°c to
Cooking time
).
, decreases by tapping the icon (in clear text)
: the display shows the digits (in yellow) of the
"Upper" resistor function
(white=OFF, red=ON)
"Upper" temperature
setpoint value
"Lower" temperature
setpoint value
"Lower" resistor
(white=OFF, red=ON)
.
, decreases by tapping the icon (in
.
, decreases by tapping the icon (in
function
If
.