Advertisement
USE AND INSTRUCTION MANUAL
MODD. EKF 423 D UD – EKF 423 D UD/0/015
EKF 443 D UD
EKF 311 D UD – EKF 364 D UD
EKF 411 D UD – EKF 416 D UD – EKF 464 D UD
EKF 464 D UD/001 – EKF 411 DUD/0/037 -
EKF464DUD/0/037
EKF 411 D AL UD – EKF 416 D AL UD – EKF 464 D AL UD
EKF 464 DALUD/0/037
rev. 15
TECNOEKA S.r.l.
Via Marco Polo, n.11 - 35010 Borgoricco (Padova) Italy
Tel. +39.049.9300344 – +39.049.5791479 Fax +39.049.5794387
www.tecnoeka.com
E-mail: info@tecnoeka.com
Advertisement
Table of Contents
Related Manuals for TECNOEKA EKF423DUD
Summary of Contents for TECNOEKA EKF423DUD
- Page 1 EKF 411 D AL UD – EKF 416 D AL UD – EKF 464 D AL UD EKF 464 DALUD/0/037 rev. 15 TECNOEKA S.r.l. Via Marco Polo, n.11 - 35010 Borgoricco (Padova) Italy Tel. +39.049.9300344 – +39.049.5791479 Fax +39.049.5794387 www.tecnoeka.com...
- Page 2 EKF 411 D AL UD – EKF 416 D AL UD – EKF 464 D AL UD EKF 464 DALUD/0/037 Batch TECNOEKA Srl declares that the mentioned above products meet the following safety regulations: Machine Directive 2006/42/EC; Electromagnetic compatibility directive 2014/30/EU...
-
Page 3: Table Of Contents
Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE Index 1. Technical service 2. General warnings 3. Technical specifications 4. Instructions for the installer 5. Use instructions (for the user) 6. Residual risks (for the user) 7. How to use the control panel 8. Ignition 9. -
Page 4: Technical Service
TECNOEKA Srl ______________________________________________________________ use and instruction manual 1. Technical service A technical check-up once or twice a year helps prolong the life of the appliance and guarantees better operation. Make sure that assistance is carried out solely and exclusively by qualified personnel. -
Page 5: Instructions For The Installer
Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE 4. Instructions for the installer The following instructions are aimed at the qualified installer, to ensure that he carries out the installation, adjustment and maintenance operations as correctly as possible and according to current legal regulations. Any operation must be performed with electrical power cut to the appliance. - Page 6 TECNOEKA Srl ______________________________________________________________ use and instruction manual 5) Fix the pump (1) to the frame with the appropriate support (2) and the two screws (4) included. 6) Connect the cables previously disconnected from electrovalve to pump. 7) Connect the tube previously disconnected from electrovalve to pump’s linking.
-
Page 7: Use Instructions (For The User
Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE WARNING Ovens model EKF 423 D UD - EKF 423 D UD/0/015 –EKF 443 D UD - EKF 311 D UD - EKF 364 D UD are not equipped with a drain pipe for cooking chamber drainage. Connecting the power cable: Mod. -
Page 8: Residual Risks (For The User
TECNOEKA Srl ______________________________________________________________ use and instruction manual temperature 30°C higher than cooking temperature) to obtain maximum uniformity. Do not salt foods in the cooking compartment. 6. Residual risks (for the user) After a cooking operation, open the door cautiously, to avoid a violent outflow of heat which could cause burns. - Page 9 Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE 10. Operation mode The cooking cycle can be run in “manual” or “programmed” mode which can be divided in 4 steps. TIME/TEMPERATURE/HUMIDITY/ “HEART” TEMPERATURE cooking parameters can be set for each step. MANUAL MODE To select cooking parameters (TIME/TEMPERATURE/HUMIDITY/“HEART” TEMPERATURE), press the button the led for the selected parameter turns on each time the button is pressed.
- Page 10 TECNOEKA Srl ______________________________________________________________ use and instruction manual 30 ° C. When the preheating temperature is reached, the message "P - H" flashes on the display and a buzzer sounds. At this point it is necessary to open the door of the oven, introduce the food to be cooked and close the door: the acoustic signal is deactivated and the cooking cycle starts.
- Page 11 Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE To zero the DELAY TIME, just press the key; the display will show the operating parameters than can be changed. Press the again to continue the cooking cycle; otherwise a delayed start for the cooking cycle can be reset by proceeding as above. N.B.: in case of BLACKOUT or power failure during the COUNTDOWN, the programmed delay for the cooking cycle is cancelled and all the relative set parameters are zeroed.
- Page 12 TECNOEKA Srl ______________________________________________________________ use and instruction manual If an automatic humidifying cycle is in progress, press button (water solenoid valve on or activation of water pump) to interrupt it. Release the automatic humidifying cycle button to resume. 18. Door device The device stops oven operations (stops the cooking cycle) whenever the door is opened.
- Page 13 Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE The cooking cycle ends when the temperature detected by the probe (introduced in the food) reaches the value sets in the parameter "core temperature" (Regardless of the value of the parameter "time") Warning: Before removing the food from the oven after cooking with the core needle probe. Carefully remove the hot probe from the cooked food, taking care not to leave it hanging out of the cooking chamber as it could cause burns.
-
Page 14: Switch-Off
TECNOEKA Srl ______________________________________________________________ use and instruction manual Fig. 6 Fig. 8 Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap with the corresponding rings for airproofing; unscrew the lamp and replace it with another lamp suitable for high temperatures (300°C), with the following characteristics:... -
Page 15: Technical Assistance
Always contact your retailer or our nearest Service Centre, giving details of the problem, the appliance model and the serial number (on the rating plate on the rear panel). For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the cover or going to www.tecnoeka.com.. -
Page 16: Wiring Layouts
TECNOEKA Srl ______________________________________________________________ use and instruction manual 25. Wiring layouts MODD. EKF 423 D UD - EKF 423 D UD/0/015 –EKF 443 D UD Only for mod. EKF 423 DUD/0/015 Power terminal board Contactor coil Safety thermostat Oven lighting lamp... - Page 17 Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE MODD. EKF 311 D UD – EKF 364 D UD Power terminal board B1-B2 Contactor coils Safety thermostat Circular heating-element Electronic card Oven motorised ventilator Door microswitch Tangential motorised ventilator Fuse Capacitor Humidifier solenoid-valve Oven lighting lamp ________________________________________________________________________________________ page.
- Page 18 TECNOEKA Srl ______________________________________________________________ use and instruction manual MODD. EKF 411 D UD – EKF 416 D UD – EKF 464 D UD EKF 464 D UD/001- EKF464DUD/0/037 – EKF 411 DUD/0/037 EKF 411 D AL UD - EKF 416 D AL UD - EKF 464 D AL UD...
-
Page 19: The Warranty
The warranty excludes products purchased as used or purchased from third parties not connected or authorized by Tecnoeka. TECNOEKA SRL is not responsible for damages, direct or indirect, caused by the product failure, or following to the forced suspension of use of the same. -
Page 20: Availability And Supply Of Spare Parts
TECNOEKA Srl ______________________________________________________________ use and instruction manual 27. Availability and supply of spare parts Tecnoeka Srl guarantees the supply of spare parts for a period not exceeding 24 months from the invoice date of the appliance purchased. After that date, availability of spare parts cannot be guaranteed.