Automatic Cleaning Of The Oven Cavity (Optional Extra); Cleaning The Door Seal; Cleaning The Door - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

__ TECNOEKA Srl ____________________________________________________ operating and instruction manual _
- once the cycle ends, switch off the oven, allow the oven cavity to cool and rinse it
thoroughly (use the shower head, where provided);
- dry using a soft cloth or running a heating cycle, setting the temperature to 150-160°C
for approx. 10 minutes (where necessary, repeat the cycle).
The side racks must be cleaned separately and then refitted.
Once you have finished cleaning, leave the oven door ajar.

8.2.2 Automatic cleaning of the oven cavity (optional extra)

8.2.2 Automatic cleaning of the oven cavity (optional extra)
8.2.2 Automatic cleaning of the oven cavity (optional extra) 8.2.2 Automatic cleaning of the oven cavity (optional extra)
The "KWT" washing system, where installed, is designed to clean the oven cavity automatically.
The "KWT" kit (optional extra optional extra) can also be retrofitted on compatible oven models. optional extra optional extra
The "KWT" washing system has the following program options:
1. L1 – Short wash
2. L2 – Medium wash
3. L3 – Long wash
4. P – Peristaltic pump cleaner and rinse agent preload
5. R – Oven cavity rinse and dry without using chemical products.
NB We advise selecting the "P" program when using the "KWT" washing system for the
first time. This will effectively remove air present in the peristaltic pumps and in the
cleaner and rinse agent lines, thus ensuring that the system works correctly.
Warnings: do not open the door while washing is in progress as this could allow the
chemical substances used for cleaning to escape along with hot fumes. Corrosion
and scalding hazard!
If the screen turns red, indicating that the temperature in the oven cavity is over
100°C, washing cannot be switched on. You can go back to the summary screen
by touching the "SELECT"

8.3 Cleaning the door seal

8.3 Cleaning the door seal 8.3 Cleaning the door seal 8.3 Cleaning the door seal
For the sake of hygiene and proper operation, it is good practice to clean the door seal at the
end of each day the oven is used. It must be washed thoroughly with lukewarm soapy water. It
must be rinsed and dried with a soft cloth. Any baked-on splatter or food debris must be
removed very gently, without the aid of sharp metal utensils, which could damage the seal
irreparably.

8.4 Cleaning the door

8.4 Cleaning the door
8.4 Cleaning the door 8.4 Cleaning the door
The door's internal glass panel on the oven cavity side can be cleaned using the same type of
degreasing product used to clean the cavity manually; otherwise, you can use a normal (non-
toxic) glass cleaner. A common glass cleaner can also be used to clean the glass panel on the
_ page 46 _________________________________________________________________________________________
"SELECT" "SELECT" "SELECT" key
.