Humidity/Steam Setting (Parameter Screen); Preheat" Setting (Summary Screen) - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

__ TECNOEKA Srl ____________________________________________________ operating and instruction manual _

4.3.3.3 HUMIDITY/STEAM setting (PARAMETER SCREEN)

4.3.3.3 HUMIDITY/STEAM setting (PARAMETER SCREEN)
4.3.3.3 HUMIDITY/STEAM setting (PARAMETER SCREEN) 4.3.3.3 HUMIDITY/STEAM setting (PARAMETER SCREEN)
Use keys and
100%). Next, confirm your choice with the "SELECT"

4.3.3.4 "PREHEAT" setting (SUMMARY SCREEN)

4.3.3.4 "PREHEAT" setting (SUMMARY SCREEN) 4.3.3.4 "PREHEAT" setting (SUMMARY SCREEN) 4.3.3.4 "PREHEAT" setting (SUMMARY SCREEN)
Touch the key and the relevant PARAMETER SCREEN comes up on the display.
Touch the key ("NO" "NO" "NO" message) to switch off the function or the "NO"
activate it. In both cases, touch the "SELECT"
choice will be confirmed automatically after 5".
During the preheating stage, the "PREHEAT IN PROGRESS"
no value ( ( ( ( --- --- --- ---) ) ) ) appears by the TIME parameter
This means that the preheating time is not included in the cooking time.
Once the preheating temperature has been reached (temperature set in cooking cavity
increased by 40°C: this temperature is held unless the door is opened), an alarm beeps and the
"PREHEAT OK OPEN DOOR" "PREHEAT OK OPEN DOOR" message flashes on the display. Open the door, place the product "PREHEAT OK OPEN DOOR" "PREHEAT OK OPEN DOOR"
to be cooked inside the oven and close the door again: the cooking cycle starts automatically.
WARNINGS
The "PREHEAT" function
display by the symbol).
During pre-heating phase, internal cooking chamber temperature must not to be higher than
260°C for no longer than 10 minutes.
_ page 24 _________________________________________________________________________________________
to increase or decrease the humidity/steam
"SELECT"
"SELECT" "SELECT"
"PREHEAT IN PROGRESS" message appears on the display and "PREHEAT IN PROGRESS" "PREHEAT IN PROGRESS"
is preset for each cooking cycle ("YES"
"SELECT" "SELECT" "SELECT" key.
key to confirm your choice; otherwise, the
.
"YES" message appears on
"YES" "YES"
value (from 10% to
key ("YES" "YES" message) to "YES" "YES"