Selecting Cooking Steps (Summary Screen) - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

Table of Contents

Advertisement

__ TECNOEKA Srl ____________________________________________________ operating and instruction manual _
4.3.4 Selecting cooking steps
4.3.4 Selecting cooking steps
4.3.4 Selecting cooking steps
4.3.4 Selecting cooking steps
Each cooking cycle can comprise up to 9 STEPS (stages). You can select the desired parameters
for each step.
To switch from one step to the next, once you have set STEP 1, proceed as follows:
touch the "STEP"
"STEP"
"STEP"
"STEP"
touch the
key. The SUMMARY SCREEN appears on the display in red with the message STEP
2 (the red background is there to advise you that the value of the TIME parameter has not been
set and hence the step selected cannot be put into effect).
Use the "STEP"
"STEP"
"STEP"
"STEP"
set the desired value.
As soon as the TIME parameter has been set, the SUMMARY SCREEN background turns blue to
indicate that STEP 2 has become operative.
Complete the setting procedure for all the other desired parameters.
To advance to the next steps (STEP 3, STEP 4...), repeat the procedure described for setting
STEP 2.
Once you have finished setting the steps, use the "START/STOP"
cycle.
The SUMMARY SCREEN for STEP 1 of the cooking cycle comes up on the display along with the
total number of steps making up the cycle in question. (E.g. 1/5 means this is STEP 1 of a total
of 5 set steps).
By the TIME parameter: the countdown of the currently active step is shown on the left, while
the total time of all the cooking cycle's steps is shown on the right.
If cooking is being done in "manual" mode, the "MANUAL"
a "programmed" cooking cycle has been chosen, a message with the name of the recipe
(program) stored appears.
_ page 26 _________________________________________________________________________________________
(SUMMARY SCREEN)
(SUMMARY SCREEN)
(SUMMARY SCREEN)
(SUMMARY SCREEN)
key to select STEP 1 (word highlighted against dark square);
key to select the TIME parameter
and then use the
"START/STOP"
"START/STOP"
"START/STOP"
"MANUAL" message appears on the display; if
"MANUAL"
"MANUAL"
and
keys to
key to start the cooking

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ekf 711 tcEkf 1064 tcEkf 1111 tcEkf 1664 tcEkf 2011 tc

Table of Contents