Program Mode; Storing Programs (Recipes) - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

Table of Contents

Advertisement

_ Electronic convection oven _ rev. 0 ________________________MODD. EKF 664 TC – EKF 711 TC – EKF 1064 TC
From the SUMMARY SCREEN
From the SUMMARY SCREEN
From the SUMMARY SCREEN
From the SUMMARY SCREEN
Use the "STEP"
"STEP"
"STEP"
"STEP"
keys to set the desired value. The value is confirmed automatically after 5". Use the
"START/STOP"
"START/STOP"
"START/STOP"
"START/STOP"
mode
mode
mode
mode
4.3.7 Program
4.3.7 Program
4.3.7 Program
4.3.7 Program

4.3.7.1 Storing programs (recipes)

4.3.7.1 Storing programs (recipes)
4.3.7.1 Storing programs (recipes)
4.3.7.1 Storing programs (recipes)
You can store up to 200 programs/recipes, giving each a NAME
letters of the alphabet.
Once you have set the cooking parameters for the program (recipe) you want to store, proceed
as follows:
touch the
key to call up the "PROGRAMMING MENU" screen.
Touch the "ST
"ST
"ST
"STEP"
EP"
EP"
EP"
key: a screen comes up with the letters of the alphabet.
You can use the
"STEP"
"STEP"
"STEP"
"STEP"
key to move vertically (each "touch" moves one space down, while holding your
finger on the "STEP"
"STEP"
"STEP"
"STEP"
Once you are on the letter you want (highlighted against a dark square), touch the "SELECT"
key, which will cause the chosen letter to appear at the top of the screen.
If you get a letter of the alphabet wrong while writing the name, move over
against dark square); touching the "SELECT"
Once you have written the name of the program (recipe), touch the "STEP"
over "SAVE" (word highlighted against dark square).
_________________________________________________________________________________________ page 33 _
key to select the HUMIDITY/STEAM % parameter
key to start the cooking cycle.
key and select the
and
keys to move horizontally (
key moves you up).
"SELECT"
"SELECT"
"SELECT"
EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
NAME, which can contain up to 10
NAME
NAME
symbol. Confirm your selection with the "SELECT"
to the left/
key will then delete the letter.
and use the
"SELECT"
"SELECT"
"SELECT"
to the right) and the
"SELECT"
"SELECT"
"SELECT"
(symbol
"STEP"
"STEP"
"STEP"
key to move
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ekf 711 tcEkf 1064 tcEkf 1111 tcEkf 1664 tcEkf 2011 tc

Table of Contents