Possible Alarms - TECNOEKA EKF 664 TC Original Operating And Instruction Manual

_ Electronic convection oven _ rev. 0 ________________________MODD. EKF 664 TC – EKF 711 TC – EKF 1064 TC

9.6 Possible alarms

9.6 Possible alarms
9.6 Possible alarms 9.6 Possible alarms
Type of alarm Type of alarm Type of alarm Type of alarm
Temperature > 100°C Temperature > 100°C Temperature > 100°C Temperature > 100°C
BLACKOUT BLACKOUT
BLACKOUT BLACKOUT
(during cooking cycle)
the alarm can only occur when using the core probe (optional)
_________________________________________________________________________________________ page 49 _
Cause of alarm Cause of alarm
Cause of alarm Cause of alarm
- Break in connection
between oven cavity probe
and circuit
board/microprocessor.
- Oven cavity probe damaged.
- Break in connection
between core probe and
circuit
board/microprocessor.
- Needle core temperature
probe damaged.
- Motor overheating (motor's
thermal breaker tripped).
- Safety thermostat tripped
- Oven cavity temperature is
over 100°C
- Outage
EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
Effect Effect Effect Effect
- Oven stopped
- A cooking cycle
cannot be activated
where it involves
setting the "core
temperature"
parameter
- Oven stopped
- Oven stopped
- Automatic wash
cycle cannot be
activated
- Oven turns off
Corrective action Corrective action
Corrective action Corrective action
- Call in a qualified
engineer
-
Call in a qualified
engineer
-
Call in a qualified
engineer
-
Call in a qualified
engineer
-
Cool the oven cavity:
open the door and touch
the key to switch on
automatic cooling.
- Press "SELECT" "SELECT" to
"SELECT" "SELECT"
restart the oven