Detaching And Refitting The Fuser Thermistor 2 - Olivetti d-Copia 2500MF Service Manual

(7) Detaching and refitting the fuser thermistor 2

Follow the procedure below to replace the fuser thermistor 2.
Procedure
1. Remove the fuser unit (see page 1-5-40).
2. Remove four claws and remove the fuser
unit cover.
3. Remove the connector.
4. Remove the band.
5. Remove the screw and remove the fuser
thermistor 2.
6. Replace the fuser thermistor 2 and install
the thermistor.
7. Refit all the removed parts.
Y108620-5
Band
Claw
Connector
Claw
Screw
Fuser thermistor 2
Service Manual
Claw
Claw
Fuser unit cover
Figure 1-5-88
Figure 1-5-89
2H0/2HZ
1-5-49