Olivetti d-Copia 2500MF Service Manual page 133

Section Description
System 04
Cover open
05
Secondary paper feed
does not start
Paper 10
feed No paper feed from
section cassette 1
11
No paper feed from
cassette 2
12
No paper feed from
optional cassette 3
13
No paper feed from
optional cassette 4
14
No paper feed from MP
tray
18
Misfeed in vertical
paper conveying sec-
tion
Y108620-5
Conditions
Cover is open during copying.
Secondary paper feed does not start within specified time
of arrival of paper at the registration section.
Feed switch 1 (FSW1) does not turn on within the speci-
fied time of upper paper feed clutch (PFCL-U) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
Feed switch 2 (FSW2) does not turn on within the speci-
fied time of lower paper feed clutch (PFCL-L) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
Feed switch 3 (FSW3) does not turn on within the speci-
fied time of paper feeder paper feed clutch 1 (PFPFCL1)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time.
Left cover 3 is opened in prior to feed switch 3 (FSW3) is
turned on.
The paper feeder feed switch (PFFSW) does not turn on
within the specified time of paper feeder paper feed
clutch 2 (PFPFCL2) turning on; the clutch is then succes-
sively turned off for 1 s and turned back on, but the switch
again fails to turn on within the specified time.
Left cover 3 is opened in prior to the paper feeder feed
switch (PFFSW) is turned on.
The MP feed switch (MPFSW) does not turn on within the
specified time of the MP paper feed clutch (MPPFCL)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time.
Feed switch 1 (FSW1) does not turn off within specified
time of feed switch 2 (FSW2) turning on (paper feed from
cassette 2).
Feed switch 1 (FSW1) does not turn on within specified
time of feed switch 2 (FSW2) turning on (paper feed from
cassette 2).
Feed switch 1 (FSW1) does not turn off within specified
time of feed switch 2 (FSW2) turning on (paper feed from
optional cassette 3, 4).
Feed switch 1 (FSW1) does not turn on within specified
time of feed switch 2 (FSW2) turning on (paper feed from
optional cassette 3, 4).
Feed switch 2 (FSW2) does not turn off within specified
time of feed switch 3 (FSW3) turning on (paper feed from
optional cassette 3, 4).
Feed switch 2 (FSW2) does not turn on within specified
time of feed switch 3 (FSW3) turning on (paper feed from
optional cassette 3, 4).
Service Manual
2H0/2HZ
Specified time
-
30 s
1864 ms
2121 ms
-
-
-
-
993 ms
1314 ms
1314 ms
1386 ms
1386 ms
1686 ms
1686 ms
1-4-3