Olivetti d-Copia 2500MF Service Manual page 290

2H0/2HZ
Maintenance
Section
part/location
Optical Laser scanner unit
section
Platen
Slit glass
Mirror 1
Mirror 2 and mirror 3
Lens
Reflector
Exposure lamp
Optical rail
Original size detection
sensor
Maintenance
Section
part/location
Transfer/ Transfer roller unit
separation
section
Separation electrode
Maintenance
Section
part/location
Developing Developing unit
section
2-4-4
Method Maintenance cycle
Clean Every service
Clean Every service
Clean Every service
Clean User call
Clean User call
Clean User call
Clean User call
Check or User call
replace
Check or User call
Grease
Check or User call
clean
Method Maintenance cycle
Replace 300K
Clean 300K
Method Maintenance cycle
Replace 300K
Service Manual
Points and cautions
Clean the slit glass with a dry
cloth.
Clean with alcohol and then a
dry cloth.
Clean with a dry cloth or alco-
hol (do not clean with a wet
cloth).
Clean with a wet cloth and
then a dry cloth only if vertical
black lines appear on the copy
image.
Clean with a wet cloth and
then a dry cloth only if vertical
black lines appear on the copy
image.
Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Replace if an image problem
occurs.
Check noise and shifting and
then apply scanner rail grease
EM-50L.
Clean the sensor emitter and
sensor receiver with alcohol or
a dry cloth only if there is a
problem.
Points and cautions
Replace. (Vacuum or clean
with a dry cloth when user call
occurs.)
Clean with a cleaning brush.
Points and cautions
Replace. (Check and replace
when user call occurs.)
Page
P.1-5-29
P.1-5-14
Page
P.1-5-39
Page
P.1-5-38
Y108620-5