Olivetti d-Copia 2500MF Service Manual page 98

2H0/2HZ
Maintenance
item No.
Adjusting margins of image printing
U402
Description
Adjusts margins for image printing.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
Display
LEAD
A
C
TRAIL
TRAIL(DUP)
TRIAL(MP)
3. Press the system menu key.
4. Press the start key to output a test pattern.
5. Press the system menu key.
6. Change the setting value using the +/- or numeric keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U402
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-64
Description
Printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Printer trailing edge margin in duplex
mode (second side)
Printer trailing edge margin (MP tray)
Printer leading edge margin
(3.0±2.5 mm)
Printer
left margin
+2.0
(2.0 mm)
–1.5
Printer trailing edge margin
(3.0±2.5 mm)
U403 U404
(P.1-3-65) (P.1-3-66)
Service Manual
Description
Setting
range
0 to 236
-80 to 236
-118 to 236
-118 to 236
-118 to 236
-118 to 236
Printer
right margin
+2.0
(2.0 mm)
–1.5
Figure 1-3-18
Initial Change in
setting value per step
75 0.042 mm
85 0.042 mm
85 0.042 mm
95 0.042 mm
155 0.042 mm
110 0.042 mm
Y108620-5