Olivetti d-Copia 2500MF Service Manual page 194

2H0/2HZ
9. Remove the connector of the scanner
inverter PWB.
10. Release the clamp and remove the wire.
11. Pull the connector out from the opening on
the rear of the scanner unit.
12. Remove two films.
13. Remove the wire guide lid.
14. Move the mirror 1 frame to notch position.
1-5-16
Scanner inverter PWB
Opening
Film
Notch position
Service Manual
Connector
Clamp
Figure 1-5-29
Film
Notch position
Mirror 1 frame
Wire guide lid
Figure 1-5-30
Y108620-5