Detaching And Refitting The Fuser Thermistor 1 - Olivetti d-Copia 2500MF Service Manual
Hide thumbs
Also See for d-Copia 2500MF:
- Operation manual (230 pages) ,
- Service manual (86 pages) ,
- Advanced operation manual (312 pages)
Table of Contents
Advertisement
2H0/2HZ
(6) Detaching and refitting the fuser thermistor 1
Follow the procedure below to replace the fuser thermistor 1.
Procedure
1. Remove the heat roller (see page 1-5-47).
2. Remove the screw and remove the fuser
thermistor 1.
3. Replace the fuser thermistor 1 and install
the thermistor.
4. Refit all the removed parts.
1-5-48
Service Manual
Screw
Fuser thermistor 1
Figure 1-5-87
Y108620-5
Advertisement
Table of Contents
