Fitting The Scanner Wires - Olivetti d-Copia 2500MF Service Manual

2H0/2HZ

(3-2) Fitting the scanner wires

NOTE
When fitting the wires, be sure to use those specified below.
Machine front: gray
Machine rear: black
Fitting requires the following tools
Two frame securing tools
Two scanner wire stoppers
Procedure
1. Remove the screw and remove the scanner
wire drum gear.
2. Remove the stop ring and bush from the-
front of the scanner wire drum shaft.
3. Remove the scanner wire drum shaft
fromthe scanner unit.
1-5-24
Screw
Scanner wire drum gear
Bush
Service Manual
Figure 1-5-43
Scanner unit
Scanner wire drum shaft
Stop ring
Figure 1-5-44
Bush
Y108620-5