Olivetti d-Copia 2500MF Service Manual page 26

2H0/2HZ
Install the optional paper feeder.
1. Install the optional paper feeder as neces-
sary.
2. Verify levelness at the four corners of the
platen using a level gauge, and adjust the
level bolts at the bottom of the machine to
optimize levelness.
Release the scanner pins.
1. Remove two tapes.
2. Remove two scanner pins.
Release of cassette lift plate.
1. Pull cassette 1 and 2 out.
Remove the lift plate stopper from each cas-
sette and attach it to the storage location.
When moving the machine, attach the lift
plate in original position.
1-2-6
Lift plate
stopper
Cassette 1
(cassette 2)
Service Manual
Scanner pin
Tape
Figure 1-2-5
Figure 1-2-6
Tape
Scanner pin
Y108620-5