Olivetti d-Copia 2500MF Service Manual page 55

Maintenance
item No.
Adjustment: Center line adjustment
U034
1. Select the item to be adjusted.
Display
LEFT
MP TRAY
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
DUPLEX
*: Setting the difference value from reference value
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, decrease the value. For output example 2, increase the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Y108620-5
Description
Adjustment of reference value
Paper feed from MP tray*
Paper feed from cassette 1*
Paper feed from cassette 2*
Paper feed from optional cassette 3*
Paper feed from optional cassette 4*
Duplex mode (second side)*
Center line of printing
Correct image
U067 U072
(P.1-3-29) (P.1-3-34)
Service Manual
Description
Setting
range
0 to 1000
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
-500 to 500
Output Output
example 1 example 2
Figure 1-3-5
2H0/2HZ
Initial Change in
setting value per step
180 0.042 mm
0 0.042 mm
0 0.042 mm
0 0.042 mm
0 0.042 mm
0 0.042 mm
0 0.042 mm
1-3-21