Detaching And Refitting The Fuser Thermistor 1 - Olivetti d-Copia 3001MF Service Manual

2K5

(6) Detaching and refitting the fuser thermistor 1

Follow the procedure below to replace the fuser thermistor 1.
Procedure
1. Remove the heat roller (see page 1-5-45).
2. Remove the screw and remove the fuser
thermistor 1.
3. Replace the fuser thermistor 1 and install
the thermistor.
4. Refit all the removed parts.
1-5-46 Service Manual
Screw
Fuser thermistor 1
Figure 1-5-84
Y112040-6