11 SERVICE WORK ON THE CHASSIS
11.16
11.17
11.18
52
Mounting side cover
S03288-10
Removing the front fender
S03291-10
Installing the front fender
S03292-10
Main work
–
Position the left side cover using holding lugs
2
and push towards the rear and, in the rear section, down-
ward.
–
Press the left side cover into the rubber bushing
A
.
–
Repeat these steps on the opposite side.
Finishing work
–
Mount the seat. (
p. 50)
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
.
–
2
Remove screws
and take off the fender.
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
1
on bushings
3
in area
p. 84)
1
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
.