Removing The Rear Wheel - KTM 690 SMC R EU 2021 Owner's Manual

13.3

Removing the rear wheel

–
Take the motorcycle off the front lifting gear. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
101999-10
Finishing work
–
Remove the rear of the motorcycle from the wheel stand.
( p. 47)
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Take the brake line out of the guide.
R05230-10
–
Manually press the brake caliper toward the brake disc to push
back the brake piston.
–
Remove screw
hole.
–
3
Remove nut
–
Pull out wheel spindle
adjuster is no longer in contact with the adjusting screw.
102000-10
–
Push the rear wheel forward as far as possible and take the
chain off the rear sprocket.
Info
Cover the components to protect them against damage.
–
Hold the rear wheel and remove the wheel spindle.
Warning
102001-01
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Take the rear wheel out of the link fork.
7
.
M8 15 Nm (11.1 lbf ft)
1
and pull wheel speed sensor
4
. Take off chain adjuster
5
to the point where the chain
WHEELS, TIRES 13
p. 47)
p. 46)
2
out of the
.
71