13 SERVICE WORK ON THE CHASSIS
13.14
94
V01265-10
Removing the left side cover
T04550-01
–
Check the chain sliding guard for wear.
»
If continuous signs of wear to the chain are visible on the
chain sliding guard in the area
–
Change the chain sliding guard.
»
If the chain sliding guard is highly worn on the underside
E
in the marked area
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten screws on the chain sliding guard.
Guideline
Remaining screws,
chassis
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 87)
Preparatory work
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
Main work
–
Remove left side cover from the rubber bushings in the
A
B
areas
and
.
–
Pull off the left side cover sideways and remove it toward the
front.
D
marked:
:
M5
5 Nm (3.7 lbf ft)
p. 88)
p. 89)