19.2
Preparing for use after storage
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the wheel stand.
(
p. 47)
–
Charge the 12-V battery.
–
Install the 12-V battery.
–
Set the clock. (
–
Perform checks and maintenance measures when preparing for
use. (
p. 30)
–
401059-01
Take a test ride.
(
p. 79)
(
p. 78)
p. 21)
STORAGE 19
p. 47)
105